Product Details
Place of Origin: Guangdong, China
Brand Name: GX
Certification: ISO 9001:2015, CE
Model Number: GX-FD50A
Payment & Shipping Terms
Minimum Order Quantity: 1 Unit
Price: Negotiable / Unit
Packaging Details: Plywood wooden case with moisture-proof film and shock-proof foam, export standard
Delivery Time: 25-35 days after deposit
Payment Terms: T/T 30% deposit,balance before shipment; L/C at sight
Supply Ability: 20 Units per Month
Capacity: |
50kg Per Batch |
Automation: |
Full Automatic With Endpoint Detection |
Endpoint Method: |
Pressure Rise Test, Rate Of Rise |
Pre-freeze Check: |
Vacuum Blocked Until Freezing Confirmed |
Chamber Material: |
SUS304 Stainless Steel |
Control System: |
PLC With 7 Inch Touch Screen, 20 Recipes |
Temperature Range: |
-50 C To +80 C |
Temperature Accuracy: |
+/-1 C |
Cold Trap Temperature: |
Below -45 C |
Ultimate Vacuum: |
<13Pa |
Rated Power: |
18KW |
Power Supply: |
380V/3PH/50Hz |
Cooling Method: |
Air Cooling |
Chamber Size: |
2500*1400*1600mm |
Tray Quantity: |
16 Pcs SUS304 Trays |
Drying Time: |
18-22 Hours, Endpoint Controlled |
Noise Level: |
<=50dB |
WIFI Module: |
Optional Remote Monitoring |
Capacity: |
50kg Per Batch |
Automation: |
Full Automatic With Endpoint Detection |
Endpoint Method: |
Pressure Rise Test, Rate Of Rise |
Pre-freeze Check: |
Vacuum Blocked Until Freezing Confirmed |
Chamber Material: |
SUS304 Stainless Steel |
Control System: |
PLC With 7 Inch Touch Screen, 20 Recipes |
Temperature Range: |
-50 C To +80 C |
Temperature Accuracy: |
+/-1 C |
Cold Trap Temperature: |
Below -45 C |
Ultimate Vacuum: |
<13Pa |
Rated Power: |
18KW |
Power Supply: |
380V/3PH/50Hz |
Cooling Method: |
Air Cooling |
Chamber Size: |
2500*1400*1600mm |
Tray Quantity: |
16 Pcs SUS304 Trays |
Drying Time: |
18-22 Hours, Endpoint Controlled |
Noise Level: |
<=50dB |
WIFI Module: |
Optional Remote Monitoring |
It Decides When the Batch Is Dry. Most freeze dryers stop because the timer runs out, which either wastes electricity or leaves the centre of the tray wet. This 50kg automatic vacuum freeze dryer runs a pressure rise test during the cycle: the vacuum valve closes for a short interval, the PLC measures the pressure climb rate, and the cycle advances or ends only when the material has actually reached its moisture endpoint. The operator loads, presses start, and comes back to a finished batch with a printed curve.
The machine is an industrial lyophilizer with a 50kg per batch capacity, SUS304 chamber and 16 trays. Shelf heating covers -50°C to +80°C at +/-1°C accuracy, cold trap holds below -45°C, and ultimate vacuum stays below 13Pa. A full cycle for fruit, meat or herbs normally completes in 18-22 hours, but the exit condition is the measured endpoint rather than the clock.
Automation covers the steps that operators usually get wrong: pre-freeze completion, vacuum application, shelf ramp timing, defrost, and shut-down. The PLC blocks the vacuum step until the product temperature confirms that freezing is complete, which prevents the most common cause of collapsed batches in small factories.
![]()
| Cycle Start | One touch start after loading, recipe selected by material icon |
|---|---|
| Pre-freeze Check | Vacuum step blocked until product temperature confirms full freezing |
| Endpoint Detection | Pressure rise test (rate of rise) decides step advance and cycle end |
| Shelf Ramp Control | Automatic ramp and hold according to recipe steps |
| Defrost | Automatic defrost at cycle end, no manual valve operation |
| Shut-down | Automatic stop of vacuum pump, refrigeration and heating |
| Self Diagnosis | Alarm with the corrective action shown on the same screen |
| Batch Report | Temperature, vacuum and pressure rise log exportable per batch |
| Model Number | GX-FD50A |
|---|---|
| Capacity | 50kg per batch |
| Automation | Full automatic cycle with pressure rise endpoint detection |
| Chamber Material | SUS304 stainless steel |
| Control System | PLC with 7 inch touch screen, 20 recipes |
| Heating System | Electric heating, radiant shelf |
| Temperature Range | -50°C to +80°C |
| Temperature Accuracy | +/-1°C |
| Cold Trap Temperature | Below -45°C |
| Ultimate Vacuum | <13Pa |
| Rated Power | 18KW |
| Power Supply | 380V/3PH/50Hz (220V/3PH optional) |
| Cooling Method | Air cooling |
| Chamber Size | 2500*1400*1600mm |
| Tray Quantity | 16 pcs SUS304 trays |
| Drying Time | 18-22 hours, endpoint controlled |
| Noise Level | <=50dB |
Running a cycle two hours longer than necessary wastes refrigeration and heating power every batch; running it two hours short leaves residual moisture that shortens shelf life and causes clumping in the pack. Because the pressure rise test measures the actual vapour release from the load, the PLC stops at the point where the material is dry, and the batch report shows the measured value. Over a year of daily production this is both an energy saving and a quality control measure.
| Brand Name | GX |
|---|---|
| Model Number | GX-FD50A |
| Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015, CE |
| Minimum Order Quantity | 1 Unit |
| Price | Negotiable / Unit |
| Payment Terms | T/T 30% deposit, balance before shipment; L/C at sight |
| Supply Ability | 20 Units per Month |
| Delivery Time | 25-35 days after deposit |
| Packaging Details | Plywood wooden case with moisture-proof film and shock-proof foam, export standard |
Q: How does the machine know the batch is dry?
A: It closes the vacuum valve for a short interval and measures the pressure rise rate; a stable value means sublimation has finished.
Q: Can we still set a fixed time if we prefer?
A: Yes, the controller supports both time based and endpoint based completion, selectable per recipe.
Q: Is an operator needed during the night?
A: No. The automatic cycle includes defrost and shut-down; an alarm is raised only if a parameter moves outside its limit.
Contact us for the endpoint detection explanation sheet, sample batch report and current lead time of this 50Kg automatic vacuum freeze dryer.